8 Inch VG10 Steel Forged Chef Knife

8 Inch VG10 Steel Forged Chef Knife

NAME: DS-98AFW-EB Japanese Kitchen Knife 8 Inch Chef Knife with Aus-8 Alloy Steel, 210mm Professional Forged Blade Cooking Knife with Ebony Handle
MODEL: DS-98AFW-EB
BLADE MATERIAL: 90Cr18MoV Stainless Steel
BLADE EDGE: Plain
HANDLE MATERIAL: Steel+Ebony
BLADE L*W*TOTAL LENGTH: 210*49*354 MM
WEIGHT: 173 g
SUITABLE FOR:Kitchen cutting Vegetables, soft tissue meat (fresh beef, chicken breast, steak, etc.) and fruits in the kitchen.
Send Inquiry

Product Introduction

image001
  • NAME: DS-98AFW-EB Japanese Kitchen Knife 8 Inch Chef Knife with Aus-8 Alloy Steel, 210mm Professional Forged Blade Cooking Knife with Ebony Handle
  • MODEL: DS-98AFW-EB
  • BLADE MATERIAL: 90Cr18MoV Stainless Steel
  • BLADE EDGE: Plain
  • HANDLE MATERIAL: Steel+Ebony
  • BLADE L*W*TOTAL LENGTH: 210*49*354 MM
  • WEIGHT: 173 g
  • SUITABLE FOR:Kitchen cutting Vegetables, soft tissue meat (fresh beef, chicken breast, steak, etc.) and fruits in the kitchen.

 

Specification

 

90Cr18MoV Stainless Steel: 90Cr18MoV is a martensitic stainless steel, which belongs to category of high-carbon and high-chromium stainless steel. It has excellent corrosion resistance and wear resistance, and is often used to manufacture kitchen knives and survival knife that require high hardness, sharpness and corrosion resistance.

Element

Content Range (%)

Function

C (Carbon)

0.85~0.95

High carbon content gives knife material high hardness and wear resistance, but reduces toughness.

Cr (Cr)

17.00 ~ 19.00

Forms a passive film to improve corrosion resistance and oxidation resistance, and is the core element of stainless steel.

Mo (Mo)

1.00~1.30

Enhances corrosion resistance (especially pitting resistance) and improves high temperature strength.

V (Vanadium)

0.07~0.12

Forms carbides, refines grains, improves wear resistance and hardness, and improves processability of chef knife.

Si (Silicon)

≤0.80

Deoxidizer can improve the strength and hardness of steel, but excessive amount will reduce toughness of knives.

Mn (Manganese)

≤1.00

Stabilizes austenite structure, improves hot workability and hardenability.

P/S (Phosphorus/Sulfur)

≤0.035

Impurity elements, which should be strictly controlled to avoid embrittlement and reduce corrosion resistance.

PS: With its high hardness, high wear resistance and excellent corrosion resistance, 90Cr18MoV stainless steel has become an ideal material for high-end kitchen knives.

Ebony Japanese Octagonal Handle
 

1.Excellent Knife Handle Material:

Ebony is a very hard and dense wood. The knife handle made of Ebony is firm and durable, can bear large external force and frequent use, and is not prone to problems such as deformation and cracking, and has a long service life.

Also,Ebony has a black and shiny appearance and a unique natural beauty, which can add high-grade and elegant temperament to knives or other knives and enhance overall aesthetics.

2.Reasonable Ergonomic Design:

The octagonal design conforms to ergonomic principle and can provide a more comfortable grip. It can better fit the hand, make the user more stable when holding it and reduce the fatigue of the hand.

Moreover, compared with round handle, the octagonal handle is not easy to roll in the hand, especially in wet or greasy environment, which can effectively prevent the kitchen knives from accidentally slipping off and improve safety of use.

In addition, this design is suitable for left-handed and right-handed, and has good universality, so it can be easily held and operated regardless of whether the user is left-handed or right-handed.

3.Rich Cultural Connotation:

The traditional Japanese octagonal handle design carries a certain cultural heritage and historical inheritance. It embodies essence of Japanese traditional craft and combines traditional and modern practical functions. Using this handle is not only a practical choice, but also makes people feel the charm of Japanese traditional culture.

image003

 

Feature and Application

 

image005

 

(1)Red-hot Roll Forging Process: High-temperature heating and repeated red-hot rolling forging continuously remove impurities in steel, making the toughness and hardness of the knife better.

(2)Thick Knife Back: The back of the knife is thick, which makes it feel more falling and more labor-saving to use.

(3)Thin Edge:The cutting edge is thin, which can meet various needs such as shredding and dicing.

(4)Easy To Grind: After high-temperature quenching and tempering, the cutting edge is easy to grind, durable and sharp.

(5)Three-layer Steel Clamping Process: It is a technology that combines steels with different properties into a three-layer structure by metallurgical bonding (such as hot rolling and forging), which is usually a combination of "low carbon steel on both sides/stainless steel+middle high carbon steel". This technology is widely used in knife production.

Core layer (high carbon steel): Provides hardness and sharpness.

Protective layers on both sides (low carbon steel/stainless steel): Enhancing toughness and corrosion resistance

Material optimization, reducing comprehensive cost.

 

Packaging & Delivery Methods

 

image007

1.DENG'S KNIFE can customize ordinary cardboard packaging boxes, high-grade gift packaging boxes and wooden packaging boxes according to your needs.

2.According to quantity of your order, we can help you arrange international express delivery, international air transportation, international railway transportation and maritime transportation.

1)Express

Under 10kg, 10-15 Days

Door-to-door service easy to pick up the goods

2)By Sea

Over300kg, Around 25-35 Days

Port-to-port service professional clearance broker needed

3)By Air

10kg-100kg, 7-15 Days

Airport-to-airport service professional clearance broker needed

 

FAQ

Q: 1: Are you a factory direct?

A: Deng's Knife: Yes, we are a direct factory.

Q: 2: Shall we get a sample before placing an order?

A: Deng's Knife: Sure, you may do it.

Q: 3: How and when we get the quote?

A: Deng's Knife: You may send inquiry, usually we will get it back around 24 hours;

Q: 4: May you provide OEM or ODM?

A: Deng's Knife: Yes, we can customize any digital print in most materials or customized logo;

Q: 5: How do you control quality?

A: Deng's Knife: We carry out semi-product inspection and finished product inspection before shipment;

Q: 6: May we visit your company and have you a showroom?

A: Deng's Knife: Sure, warmly welcome to our factory and yes, we have our showroom with around 500 square meters;

Q: 7: Do you have certificates for different markets:

A: Deng's Knife: Yes, we follow all the rules of LFGB, BSCI, FDA etc and also including regulations of surroundings protection;

Hot Tags: 8 inch vg10 steel forged chef knife, China 8 inch vg10 steel forged chef knife manufacturers, suppliers, factory, 8 Inch Durable Damascus Chef Knife, 8 Inch Forged Hammer Chef Knife, 8 Inch Sharp Chef Knife, 8 Inch VG10 Steel Forged Chef Knife, chef knife, DS 501C 8 Inch Chef Knife ABS Handle

Next:No Information

Send Inquiry